KA/NA-122

产品名称KA/NA-122

Prevents burnout of a single-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent compressor motor burnout

Intended use

Compressor (for refrigerators, air conditioners, and other appliances)

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL、VDE、CQC

Mechanical Characteristics

Case material

Phenolic resin
Tracking resistance: Level 3

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder terminal
FASTON tab terminal (#187, #250)

Product mounting method

Place the product into a Φ25 hole and bring it into intimate contact with the motor

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 1.5 kW

Contact withstand current

60/40A

Contact withstand count

10,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

100 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 160°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  • NA failsafe (with safety mechanism)
KA/NA-172

产品名称KA/NA-172

Prevents burnout of a single-phase motor
Higher tracking resistance than the 122 type

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent compressor motor burnout

Intended use

Compressor (for refrigerators, air conditioners, and other appliances)

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL、VDE、CQC

Mechanical Characteristics

Case material

Unsaturated polyester
Tracking resistance: Level 0

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

FASTON tab terminal (#250)

Product mounting method

Place the product into a Φ25 hole and bring it into intimate contact with the motor

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 1.5 kW

Contact withstand current

60/40A

Contact withstand count

10,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

100 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 160°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  • NA failsafe (with safety mechanism)
KA-311

产品名称KA-311

Prevents burnout of a three-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent burnout of general-purpose three-phase motors

Intended use

Submerged pump
Various general-purpose motors
and more

Operating type

Bimetal type (Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-0)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder incurved terminal
FASTON tab terminal (#187, #250)

Product mounting method

Fixed in place with M4 screws or by other means
39.5-mm to 40-mm interval

Electrical Characteristics

Rated voltage

AC 250/500V

Rated capacity

Up to 1.0 kW

Contact withstand current

30/20A

Contact withstand count

5,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KA-313

产品名称KA-313

Prevents burnout of a three-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent burnout of general-purpose three-phase motors

Intended use

Submerged pump
Various general-purpose motors
and more

Operating type

Bimetal type (Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL (with some exceptions)

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-0)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder incurved terminal
FASTON tab terminal (#250)

Product mounting method

Fixed in place with M4 screws or by other means
40-mm interval

Electrical Characteristics

Rated voltage

AC 250/500V

Rated capacity

Up to 2.2 kW

Contact withstand current

80/50A

Contact withstand count

3,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KA-314

产品名称KA-314

Prevents burnout of a three-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent burnout of general-purpose three-phase motors

Intended use

Submerged pump
Various general-purpose motors
and more

Operating type

Bimetal type (Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL (with some exceptions)

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-0)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder incurved terminal

Product mounting method

Fixed in place with M4 screws or by other means
56-mm interval

Electrical Characteristics

Rated voltage

AC 250/500V

Rated capacity

Up to 7.5 kW

Contact withstand current

200/150A

Contact withstand count

2,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KA-315

产品名称KA-315

Prevents burnout of a three-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent burnout of general-purpose three-phase motors

Intended use

Submerged pump
Various general-purpose motors
and more

Operating type

Bimetal type (Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL (with some exceptions)

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-0)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder incurved terminal
With auxiliary metal fittings for fixing leads in place

Product mounting method

Fixed in place with M4 screws or by other means
66-mm interval

Electrical Characteristics

Rated voltage

AC 250/500V

Rated capacity

Up to 15 kW

Contact withstand current

300/200A

Contact withstand count

1,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KA-316

产品名称KA-316

Prevents burnout of a three-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent burnout of general-purpose three-phase motors

Intended use

Submerged pump
Various general-purpose motors
and more

Operating type

Bimetal type (Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL (with some exceptions)

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-0)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Thread-fastening terminal

Product mounting method

Fixed in place with M5 screws or by other means
80-mm interval

Electrical Characteristics

Rated voltage

AC 250/500V

Rated capacity

Up to 37 kW

Contact withstand current

600/400A

Contact withstand count

1,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KM-152

产品名称KM-152

Manual return version of KA-122
Protectors are returned manually

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout
Performs manual return by pushing the button

Product purpose

Prevent burnout of general-purpose motors

Intended use

Electric power tools, food shredders, and other electric appliances that must not be automatically returned

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

None

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, HB, CTI 175 or higher)
* UL 94, V-0 also available

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Terminal with holes
FASTON tab terminal (#187, #250)

Product mounting method

Place the product into a Φ25 hole and press it down on an item you want to protect

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 1.5 kW

Contact withstand current

60/40A

Contact withstand count

200 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 0°C or less
  • Temperature tolerance: ±10°C
  •  
KJ-100

产品名称KJ-100

Prevents burnout of a single-phase compressor motor
Can be directly inserted into the hermetic pin of a compressor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout
Can be directly mounted on the hermetic pin of a compressor

Product purpose

Prevent compressor motor burnout

Intended use

Compressor motor of refrigerators and other appliances

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

None

Mechanical Characteristics

Case material

Unsaturated polyester + PBT resin

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Terminal for hermetic pin

Product mounting method

Insert into a common terminal of a compressor's hermetic pin

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 0.8 kW

Contact withstand current

20/15A

Contact withstand count

10,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

100 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 110 to 160°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KM-331

产品名称KM-331

Manual return version of KA-311
Protectors are returned manually

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout
Performs manual return by pushing the button

Product purpose

Prevent burnout of general-purpose three-phase motors

Intended use

Various industrial motors
Used at points where they must not be automatically returned

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

None

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-HB, CTI 175 or higher)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder incurved terminal
FASTON tab terminal (#187, #250)

Product mounting method

Fixed in place with M4 screws or by other means
39.5-mm to 40-mm interval

Electrical Characteristics

Rated voltage

AC 250/500V

Rated capacity

Up to 1.0 kW

Contact withstand current

30/20A

Contact withstand count

200 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 0°C or less
  • Temperature tolerance: ±10°C
  •  
KM-333

产品名称KM-333

Manual return version of KA-313
Protectors are returned manually

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout
Performs manual return by pushing the button

Product purpose

Prevent burnout of general-purpose three-phase motors

Intended use

Various industrial motors
Used at points where they must not be automatically returned

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

None

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-HB, CTI 175 or higher)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder incurved terminal
FASTON tab terminal (#250)

Product mounting method

Fixed in place with M4 screws or by other means
40-mm interval

Electrical Characteristics

Rated voltage

AC 250/500V

Rated capacity

Up to 2.2 kW

Contact withstand current

80/50A

Contact withstand count

200 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 0°C or less
  • Temperature tolerance: ±10°C
  •  
KM-153

产品名称KM-153

Manual return version of KA-123
Protectors are returned manually

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout
Performs manual return by pushing the button

Product purpose

Prevent burnout of general-purpose motors

Intended use

Electric power tools, food shredders, and other electric appliances that must not be automatically returned

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

None

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-HB, CTI 175 or higher)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Terminal with holes
FASTON tab terminal (#187, #250)

Product mounting method

Place the product into a Φ30 hole and press it down on an item you want to protect

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 2.2 kW

Contact withstand current

80/50A

Contact withstand count

200 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 0°C or less
  • Temperature tolerance: ±10°C
  •  
KM-132

产品名称KM-132

Manual return version of KA-112
Protectors are returned manually

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout
Performs manual return by pushing the button

Product purpose

Prevent burnout of general-purpose single-phase motors

Intended use

Electric power tools, food shredders, and other electric appliances that must not be automatically returned

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

None

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-HB, CTI 175 or higher)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Terminal with holes
FASTON tab terminal (#187, #250)

Product mounting method

Fixed in place with M4 screws or by other means
38-mm interval

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 1.5 kW

Contact withstand current

60/40A

Contact withstand count

200 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 0°C or less
  • Temperature tolerance: ±10°C
  •  
KM-133

产品名称KM-133

Manual return version of KA-113
Protectors are returned manually

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout
Performs manual return by pushing the button

Product purpose

Prevent burnout of general-purpose single-phase motors

Intended use

Electric power tools, food shredders, and other electric appliances that must not be automatically returned

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

None

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-HB, CTI 175 or higher)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Terminal with holes
FASTON tab terminal (#187, #250)

Product mounting method

Fixed in place with M4 screws or by other means
38-mm interval

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 2.2 kW

Contact withstand current

80/50A

Contact withstand count

200 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 0°C or less
  • Temperature tolerance: ±10°C
  •  
KA-112,142

产品名称KA-112,142

Prevents burnout of a single-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent burnout of general-purpose single-phase motors

Intended use

Submerged pump
Various general-purpose motors, and more

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-0, CTI 175 or higher)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder terminal
FASTON tab terminal (#187, #250)

Product mounting method

Fixed in place with M4 screws or by other means
38-mm interval

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 1.5 kW

Contact withstand current

60/40A

Contact withstand count

5,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KA-113,143

产品名称KA-113,143

Prevents burnout of a single-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent burnout of general-purpose single-phase motors

Intended use

Submerged pump
Various general-purpose motors, and more

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL (with some exceptions)

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-0, CTI 175 or higher)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder terminal
FASTON tab terminal (#250)

Product mounting method

Fixed in place with M4 screws or by other means
38-mm interval

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 2.2 kW

Contact withstand current

80/50A

Contact withstand count

2,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KA-114

产品名称KA-114

Prevents burnout of a single-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent burnout of general-purpose single-phase motors

Intended use

Submerged pump
Various general-purpose motors, and more

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-0, CTI 175 or higher)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder terminal

Product mounting method

Fixed in place with M4 screws or by other means
56-mm interval

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 7.5 kW

Contact withstand current

200/150A

Contact withstand count

2,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 120 to 140°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KA-123

产品名称KA-123

Prevents burnout of a single-phase motor

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout

Product purpose

Prevent compressor motor burnout

Intended use

Compressor (for refrigerators, air conditioners, and other appliances)

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-0, CTI 175 or higher)

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder terminal
FASTON tab terminal (#250)

Product mounting method

Place the product into a Φ30 hole and bring it into intimate contact with the motor

電気特性

Electrical Characteristics

AC 125/250V

Rated capacity

Up to 2.2 kW

Contact withstand current

80/50A

Contact withstand count

3,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

100 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 160°C
  • Set return temperature: 60°C to 70°C
  • Temperature tolerance: ±10°C
  •  
KA/NA-125

产品名称KA/NA-125

Prevents burnout of a single-phase motor and is equipped with an independent temperature detection device

Basic Characteristics

Product summary

In addition to the features of the 122 model, this product has an independent temperature protection feature.

Product purpose

Prevent compressor motor burnout

Intended use

Compressor (for refrigerators, air conditioners, and other appliances)

Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)

Compatible standard

UL、VDE

Mechanical Characteristics

Mechanical Characteristics

Phenolic resin (unsaturated polyester)
(UL 94, V-0, CTI 175 or higher)
* CTI600 or higher also available

Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed

Connection terminal type

Solder terminal
FASTON tab terminal (#250)

Product mounting method

Same as KA-122

Electrical Characteristics

Rated voltage

AC 125/250V

Rated capacity

Up to 1.5 kW

Contact withstand current

60/40A

Contact withstand count

5,000 times or more

Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less

Insulation resistance

100 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Thermal part set operating temperature: 140°C to 160°C.
  • Thermal setting return temperature: 60°C to 70°C.
  • Temperature setpoint operating temperature: 120°C to 130°C
  • Temperature setpoint return temperature: 70°C to 80°C
  • Temperature tolerance: ±10°C
  •  

↑