製品名AL-300
Connected to the discharge waterway of a pump and accumulates pressure to reduce water hammer and pressure drops due to water leaks from pipes.
Basic Characteristics
| Product summary | Prevents small inverter pumps from inching |
|---|---|
| Product purpose | Accumulate pressure and absorb pulsations and impact pressure of small pumps |
| Intended use | Prevent inching, attenuate pulsation, mitigate pressure fluctuations, and reduce water hammer |
| Operating type | Accumulate fluid by means of nitrogen gas enclosed in the rubber bladder, and by springs and resin products placed above the diaphragm. |
| C8 | RoHS compliant |
Mechanical Characteristics
| Outer dimensions | φ 85.4×72.5 |
|---|---|
| Case material | Case: SPCE |
| Operating temperature range | -20～90℃ |
| Connection terminal type | G1/2 (PF1/2) male screw O-ring seal |
| Product mounting method | Pressure: Tighten the G1/2 (PF1/2) male screw into a female screw |
Characteristics Unique to This Product
- Compatible solution: Tap water, well water, and clean water for factories
- Contained gas: Nitrogen gas
- Maximum working pressure: 0.5 MPa
- Capacity: 0.07 L
Inquiries about our products
